In DOS execute this command to flash: afudos /i<New ROM filename> /o<Create backup of old version>
I.e afudos /i0401.rom /o0302.rom
To update with only a usb drive and firmware, just rename the rom-image to 701.rom, put it on a flash drive, reboot, and press ALT+F2 to load the updater. It's failsafe, during a bad flash it will boot into the flash utility and wait for a valid rom-image.
0127 - Download
* Bios date 2007-11-01
* Changed the shutdown key from pressing power button for 4 seconds to one click after CrashFree successfully recovered the BIOS (BUG#=338)
* Changed DMI Type1 System Product Name to "Eee PC".
* Changed POST and setup menu model string to "Eee PC 2G/700"
* Updated the discharge voltage of 2S2P 2200mA battery.
* Fix the positions of setup tokens.
* Changed the boot block version from 20 to 21.
0128 - Download
* Bios date 2007-11-07
* Updated onboard DIMM SPD to support 512MB DRAM
* Changed the boot block version from 21 to 22
* Changed the hardware compatible version from 03 to 04
0129 - Download
* Bios date 2007-11-19
EeePC 701
8804 - Download
* Bios date 2007-07-25, initial release
* Full 100 MHz FSB
* Chip report as an Intel I915GM rather than Intel I910GML
* Wireless and screen flickering problems reported
0302 - Download not available, please report if you found it
* Bios date 2007-10-10
* FSB lowered to 70 MHz
0204 - Download
* Bios date 2007-10-05
* Fixes USB2 and webcam problems
0401 - Download
* Bios date 2007-10-17
* Fix sometimes password is requested when entering setup
EeePC 702
0103 - Download
* Bios date 2007-10-25
* Initial release
BIOS Tools
Change boot image
Change boot image using AMI Tools (instructions included, starting at page 50). Thanks Reverend Jones/mbm (from openwrt.org). Some samples can be found here and FAQ in post #24 below.
Bios configuration
Using AMI BIOS Configuration program you can look and change various default settings in the rom-image.
感恩哩
~~這樣就不用為了備份作業系統而煩惱了!
!
